The Iso-Max are designed with two propellers driven by a motor whose special rotor stator combination provides a dense and uniform flow. This results in less friction with the duct and a favorable pressure drop improving operating efficiency.

It is equipped with a thermal safety switch that disconnects the appliance if the sensor detects overheating. And a practical pre-wiring to facilitate its connection by the user.

It has a relatively low weight that makes it easy to handle. It can be hung by supports integrated in the upper part for this purpose.
For even more efficient use we recommend using Max Fan« Pro in combination with the corresponding Can Filter« filters.
If you still have not been able to solve your noise problem, Iso-Max will help you to solve it.

Installation
Iso-Max extractors can be placed in any position. It can be intercalated and fixed directly in the extraction induction system. For safe mounting, we recommend the use of anti-vibration joint clamps, which considerably reduce the transmission of noise to the duct system. Place the power cables in such a way that they cannot be damaged and that there is no risk of tripping over people or other objects inside the room. The extractor must be connected to the ventilation channel on both sides, air inlet and outlet respectively, so that after installation, the propeller can no longer be accessible. Electrical connections to the device must be made as indicated on the printed circuit diagram on the metal plate detailing the puller.

More info: Iso-Max vs Extraction box