Installing the SMS310C EC Controller with dispenser

SMS310 Driver Installation

Fix the SMS310 monitor to the wall near the nutrient tank with an adhesive velcro or with 4 screws.

Connect the pump coupling base (black and white color) to the power supply.

Dip the tip of the electrode (up to 2.5cm) in the nutrient mixture. Hold the electrode with the help of a polyexpan plate.

Turn on the monitor by pressing the ON / OFF button

Select the set point, with the help of the graduated wheel.

Installing the MP810 dosing pump

Connect the soft tube to the pump (suction tube - left) and the filter (white) to the other end of the tube (to prevent the aspiration of solids)

Connect the rigid tube to the pump (impulsion tube - right) - Optional: a black thread to connect to a pipe.

Fix the pump to the wall or directly to the Liquid FERTILIZER bottle, in a vertical position in the immediate vicinity of the nutrient tank.

Connect the electrical socket of the dosing pump to the coupling socket (white and black) of the SMS310 controller.

IMPORTANT: For a smooth adjustment of the nutrient level, it is advisable to dilute the liquid fertilizer with water in a carafe. Example: For a 100 lt tank, dilute 100cl of FERTILIZER in a 5 liter jug of water. This data can be adjusted according to the volume of your tank, the concentration of your fertilizer corrector, and the strength of your recirculation pump or air diffuser stone.

VERY IMPORTANT: For a homogeneous and immediate mixture of the liquid fertilizer to your irrigation water tank, install a powerful recirculation pump and / or an air diffuser stone at the bottom of your tank