Leaders in the sale and distribution of horticultural products

Click on the image to enlarge it
  • RIEG0395
  • RIEG0395
  • RIEG0395
  • RIEG0395

Eco Grow Growmax Water Filter 240L / h

RIEG0395

Sold by Natural Systems. More information

This equipment is designed to immediately remove chlorine and sediment from water. Removes up to 99% of chlorine and sediments larger than 5 microns. Chlorine and sediment free water is essential for growing and caring for plants, keeping beneficial microorganisms, bacteria and fungi at the roots.

These microbes cannot survive in chlorinated water. A water without chlorine is also essential for the organic cultivation of fruits, vegetables, hydroponics and any other bioorganic cultivation method in general. This filter is not designed to remove dissolved salts (PPM) from water. Most of the PPM are minerals that can only be removed with Reverse Osmosis equipment.

Removes up to 99% of chlorine.
Strengthens the roots, healthier plants.
It improves the performance of the fertilizers and protects the beneficial microorganisms in the soil.
Ideal for organic crops.

ELIMINATES: Chlorine, Sediments, Soil, Rust, Herbicides and Pesticides, Volatile Organic Pollutants (Chemical Pollutants, Benzenes, Oils, Trialomethanes, Detergents, PCB's)

* Note: Do not install the system with a water pressure greater than 90 psi (6 kg / cm2). If you are unsure of the water pressure, check it by purchasing a pressure gauge from your hardware store. If the pressure is above 90 psi (6 kg / cm2) install a pressure regulator available from your Grow Max Water dealer or hardware store. Do not use the system with hot water.

How to install the ECO GROW system:

1. Connect the adapter to the garden tap.

2. Cut the desired length of the 1/4 "(0.635 cm) tube and connect it by pressing it into the threaded adapter on the garden tap. Connect the other end of the tube to the water inlet connection to the system, located on the right.

3. Connect by pressing one end of the excess part of the tube into the water outlet connection of the system, located on the left side. Connect by pressing the other end of the tube into the tap, cutting this again if necessary. The equipment is ready for use.

4. Before using the water filtered by the equipment, it is necessary to let it pass through the filters for about 5 minutes, pouring it down the drain. When the water comes out transparent it can be used for watering.

The equipment is ready to be used!